Needle-free IV administration sets (B-Series), Length 103", 10DPM

The Needle-free IV administration sets (B-Series),Length 103", 10DPM is designed specifically for B-Series infusion pump compatibility, including Baxter calibrated models. Like all SENSIVET IV sets, it's built on the premise that the right set for the right pump is a non-negotiable patient safety requirement.

The 10 DPM drop factor is the Baxter calibration standard, ensuring your pump delivers exactly what you program — essential for accurate fluid resuscitation and maintenance rates.

The 1 needle-free injection site support safe medication administration without introducing sharps into the line. The clear housing lets you confirm fluid flow visually with each access.

FEATURES:

• B-Series pump compatible (Baxter and compatible models)
• 103" medical-grade tubing
• 10 DPM drop factor (macro-drip)
• 1 clear needle-free injection site
• Kink-resistant construction
• Rotating male Luer connector (lock and slip compatible)
• Ergonomic roller clamp
• Precision filter drip chamber

1. Verify your infusion pump is a Baxter or compatible B-Series model before using the Needle-free IV administration sets (B-Series),Length 103"".
2. 2. Open packaging aseptically. Inspect the set before use.
3. Close the roller clamp, then spike the fluid bag firmly.
4. Squeeze the drip chamber to fill it ~halfway.
5. Prime the tubing by slowly opening the roller clamp until fluid reaches the distal end and all air is expelled.
6. Close the clamp and connect to the patient's catheter or extension set.
7. Load the tubing segment into the B-Series pump per manufacturer instructions.
8. . Program rate and total volume, then start infusion.
9. Administer medications through the needle-free site(s) using a compatible needleless syringe.
10. Replace per your facility's IV set change protocol.

Available in: USA